Archive

For the Camera Tips category

Mar 04

Skills to capture the dynamic scene

By adminComments Off

Many photographers only when shooting sports events or fast moving objects, you will think of to capture dynamic scenes. Of course, need the action of the outstanding athletes in sports photography, but in fact in any subject matter of photography, emphasizing the dynamic elements are likely to bring about a different kind of fun – even if the action is very small, very slow and even difficult to detect. This, we are concerned that in the skills to capture the dynamic scene.

Capture the dynamic skills:

(1) reduce the shutter speed

The reason is very simple, motion blur, the Aspire 5315 Battery camera shutter open long enough, the camera’s image sensor can “see” the subject of continued action, not just the action of a moment.

The first trick is to capture dynamic images, select a slower shutter speed.
If the shutter speed is fast (for example, 1/4000 seconds), it is basically less may be sold for dynamic effects (unless the subject is extremely fast movement); If you select a long shutter time (for example 5 seconds), then the subject do not move too long distance, you will be able to see the blur effect.
Shutter speed in the end should be set, how many? Of course, this depends on the speed of the subject. In the same shutter speed, a crawling snail and a moving car will bring a completely different result.

Should also be considered a factor in determining the shutter speed is how much light in the VGP-BPS3 battery scene you’re shooting. A longer shutter time means there will be more light through the lens into the camera, which may lead to overexposure. Later, we will talk about some ways to reduce light to enter and you can choose the way of longer shutter time.
So, what shutter speed should be set to how many to show in the image dynamic it? This problem does not have a clear answer, because, depending on the speed of subject movement, you want the dynamic degree of ambiguity and the subject of light, the shutter speed setting is clearly also differ materially. The key is in effect and try different shutter speed (at this point, digital cameras are ideal, you may want to make the shot, will not increase the cost of a penny).

(2) Hold the camera steady

There are two ways – subject movement or camera in the mobile (or both are moving) to shoot dynamic images. Moving subjects which is relatively simple, easy and successful one.

Shot this photo as much as possible to keep the cga-du21 battery camera completely still, otherwise the pictures taken, in addition to the main fuzzy, due to the longer shutter times, you will feel the entire photo is virtual. Whether the frame on a tripod or put the camera in the other stationary objects (you can consider using the shutter release, or delay self-timer mode, they can prevent camera shake caused by pressing the shutter), in short, as guarantee that the camera is completely still.

(3) Shutter priority mode

As mentioned earlier, when shooting photos of this prominent dynamic, one of the most important settings is the shutter speed. Even very small changes in shutter speed, may also be a tremendous impact on the final image. Therefore, in the mode of a complete control over shutter speed to shoot.

In other words, either the camera settings sake of manual mode, or set to shutter priority mode. In PA3383U-1BRS battery shutter priority mode, you determine the shutter speed, while the camera according to light conditions to determine the other settings (such as aperture) to ensure the photo to get a good exposure. Shutter priority mode is very convenient, it ensures that you get the dynamic effects, while allowing the photos to get the basic exposure.

Of course, if you have the confidence to get the balance between the aperture – shutter, you can also choose a full manual mode. The following describes the three kinds of response. (Of course there are the first four kinds of ways is the light changes, for example, wait until the sky darkens, which is why many photos contain the dynamic fuzzy image in the night or at dawn and dusk shooting the.

1 small aperture

So how can we reduce the light entering the camera to compensate for the prolonged exposure to the impact of it? Light entering the camera through the hole smaller, how? In fact, this is to regulate the Aspire 5732Z Battery nature of the aperture. If you shoot with shutter priority mode, the camera will automatically set the aperture – but if you use full manual mode, then they would have increased the exposure time, a scaled-down aperture.

In fact, this do not you think so difficult, because the camera aperture and shutter speed are set according to the “file”. You slow down the shutter speed to a file, is doubling the exposure time (for example from 1/250 seconds to slow down to 1/125 seconds), the light enters the camera has more than doubled. Aperture settings, too, you narrow the aperture of a file, then the shutter is open when the size is reduced by half, so the light entering the camera cut in half. This easy to handle, regardless of which setting to adjust a file, you just another also adjust a file on it, the amount of light entering the camera stays the same, the photos can still get good exposure.

2 lower sensitivity (ISO)

Another way that the long exposure to excessive light, adjust the camera’s ISO setting. ISO will affect the sensitivity of the image sensors of digital cameras. The higher INSPIRON 500M Battery ISO settings so that the sensor is more sensitive to light, a lower ISO setting so that the sensitivity of the sensor to reduce. Set a lower ISO value, so that you can select a slower shutter speed.

3 gray mirror

This filter will reduce the light entering the camera through the lens, so that you can use a slower shutter speed. It’s like wear sunglasses to your camera (in fact, really was not the case with gray mirror with sunglasses temporary replacement). For example, you shoot a bright light, scenery piece, you want to use a slow TouchSmart tx2 Adapter shutter speed to express the dynamic of the cloud, the results of the slow shutter speed is likely to lead to the photo seriously overexposed. This time in gray mirror can help a lot of help, it lets you use a slow shutter speed for proper exposure. Dynamic fuzzy image that a lot of shooting during the day rely on gray mirror.
Another similar effect filter is a polarizer. To remember, however, the polarizer will not only reduce the light, it will also affect the photo (for example, reduce glare, reflection, and even change the color of the sky – this is not necessarily the effect you want).

The other two skills worth a try:

If you want to capture images with motion blur, you can also try the slow sync flash. This SONY NP-FV100 Battery technique combines the use of long exposure and flash, they were the objects of the strobe lights will be solidified in the picture, and the rest will be blurred.

Another worth trying the technology is to recover focus, allow the camera to follow moving objects, try to keep them at the same speed (of course this is basically can not do, but you must try to do it), the movement under the shutter, so the main sharp focus while the background will blur.

Jan 13

SLR Photography – master the changes of time and light

By adminComments Off

The most emphasis on professional landscape photographer take the early morning and evening, this time a mild natural light, while the sun angle is low, so the scene can not only show more detail, but also the long shadow of three-dimensional shape. In addition, the lower angle of the sun in the morning and evening, the outdoor temperature is low, is covered with a layer of warm colors of nature, we will see in the Inspiron 1501 viewfinder different from the usual side of nature. In the early morning and dusk, the sun is directly reflected on the best time, like sunrise and sunset, are the subject of most concern landscape photographers. For landscape photography in terms of weather, is also an important factor in the early morning and dusk, the sky will show in the case of a more quiet blue, which is important to choose this time to shoot one of the reasons. For digital SLR cameras in terms of shooting in the morning and evening, to grasp the camera’s white balance feature, if you want to record the scene color temperature of light, preferably daylight white balance mode is set, otherwise the camera’s automatic white balance feature automatically change the color temperature, so early in the morning and evening Dell Inspiron 1545 photographs lose their color charm.

Noon

Under strong midday light for landscape photography is not beneficial in terms of time, but drawn by reasonable, you can shoot a good surprise photography. If you use the top light at noon in the woods, you can show the light transmission state, like the photo of the leaves and the background of the virtual space of the leaves. However, the strong midday due to the light, or by direct exposure of the leaves tend to produce reflective surface, so the original rich colors of nature will be greatly reduced, the choice of shooting the scene, we should try to avoid this from happening. Sunny conditions, you can safely use a telephoto lens and a small aperture to shoot, the amount of light can be nearly enough to ensure picture clarity, and for such a state of VGP-BPS13 battery motion capture spray the scene, but also a favorable time.

Cloudy day

Good landscape photography is not only the birth of Yuqing good weather, on the contrary, many experienced landscape photographers often choose to go out in bad weather in the shooting. For example, when it is cloudy, the sun’s rays through the clouds, will produce soft and uniform light scattering, the contrast in nature will become very low, which is more conducive layered performance. Meanwhile, the lack of a cloudy day the sun’s direct light, reflective surface features will be weakened, and thus will be more rich color and detail. Cloudy atmosphere is also different from the usual, then photographs will bring a touch of melancholy and deep color, on the other to impress people. Cloudy in the shooting scenery themes, we should always pay attention to setting the camera’s exposure compensation, auto exposure inspiron 1545 battery function to avoid causing the screen is too bright, cloudy day and thus lose the unique atmosphere.

Fog image

In landscape photography, the successful use of fog, can take a mood far-reaching work. Clear is the picture of the factors that must exist, but all the elements are clear and present photos is not necessarily a good landscape photography. Taken as the Slender West Lake in this photo fog, hazy vision had a profound mood, played down the figurative scenes, so that viewers feel like being in the dream being, while taking advantage of a clear close-range in the pavilion, the viewer again pull them back to reality. Fog is the test of the photographer’s shooting ability, especially with the choice of foreground and background with the theme and Inspiron 1501 battery object of the echo, and only go one more film, more and more, only to grasp the Fog of shooting skills.

Wind and rain

Use of wind power, can be expressed in the vitality of nature and Smart, is the so-called sign of trouble. In this photo reeds blowing in the wind, the low-angle shot incorporating the tranquil blue sky and wind in the swaying golden reeds, in sharp contrast between the two, a move a quiet complement each other.

In landscape photography, the performance characteristics of the practices are a lot of rain, for example, choose a darker background and the longer the exposure time can be freezing rain in the picture. In addition, water can also choose to place, playing in the iPad 2 Leather Case puddles in the rain shooting ripples.

Aug 15

Waterproof Digital Camera Using Tips

By adminComments Off

Taking those lovely underwater pictures and saving those magical moments would have been impossible without that waterproof camera which has been my companion in all the aquatic adventures. The journey probably began when I went to buy it. It was like looking for the Holy Grail. I still remember that I got just the one when I was on the verge of giving it up. I have a very neat black camera. Let me share some of the things about my little CANON BP-711 battery camera.

Most of the worlds beauty is probably found under water and not so easy to photograph. These tips for under water digital photography will reveal the tips and tricks you need to know to be come a successful under water photographer.

Have you ever thought of capturing the amazing under water world in your camera? Or have you ever taken the flicks while river rafting or under a waterfall? A regular digital camera cannot work for such purposes. You have to make the use of waterproof digital camera for this purpose.

CANON digital ixus 300 battery Digital camera technology is apt for nature and landscape photography. You are sure to get breathtaking images that open up your eyes at once. If you are fond of landscape and underwater photography, nothing gives you a better experience than the digital photography.

But you must know the difference between land iPad 2 Foldable Leather Case photography and water photography first. Water is not transparent like air. Water consists of sand, dust and other particles and fragments which make it dense. So you need special camera to take the photographs.

Basically, the waterproof cameras fall under two categories. The first category is amphibian cameras. Their name suggests their features very well. Amphibians are the vertebrates who can live on land as well as inside the water through out their lives. They are adaptable to both the habitats. Likewise, the amphibian Canon lp-e6 Battery camera can also work in water as well as in the normal conditions. These cameras are the built-in waterproof cameras. The camera is also good to carry while traveling.

Amphibian digital cameras are easy to use and carry while tracking. The camera is able to take photographs on land and water with the help of an in-built lens. The lens is fitted with in the body of the camera. But you have both the zooming options of optical zoom and digital zoom. Almost all the leading companies manufacture the amphibious digital waterproof camera. You will envision some fantastic waterproof camera in the marketplace.

Like all the CANON nb-1lh Battery digital cameras, the waterproof cameras are also available in multiple mega pixels and internal memory of certain mega bytes. But you cannot use the amphibious cameras to a larger depth. Every amphibious camera has a limited depth to be waterproof. You cannot use this camera above the depth of 5 feet. If you are fond of underwater photography and some serious landscape photography, you need to do waterproof housing of your camera.

According to the photography experts, an NP-BN1 Charger SLR camera is the best for underwater clicking and river rafting. These cameras have enhanced features like exposure control, auto focus and through the lens viewing. You can make your SLR camera or any other camera water resistant by waterproof housing. You will get a number of water housing covers on the block. All the major companies have water housing for their digital cameras. Your digital camera will perform wondrously underwater, in rain and anywhere in water.

The flash in waterproof camera does not reach beyond twelve feet. So it is best to take the photos when the sun is overhead. This will give you clearer images.

The most important thing to remember about waterproof cameras is their maintenance. Never forget to lubricate your waterproof digital camera. Clean the O ring properly. O ring is the seal that Canon nb-2lh battery charger protects water from entering in to the camera. This seal has to be scratch less and without any dust and cuts on it. Damage to the O seal can damage the whole camera. If you have any doubt about the seal, immediately get it replaced.

Now with all this SONY NP-BG1 battery information, enjoy the most exciting views of nature with your waterproof digital camera. Have fun by adding audio-visual affects to them and accentuate the beauty of your photographs. Save the photographs and send them to friends.

Here are some dos and don’ts that you should follow when you have a digital camera:
* The camera should be cleaned regularly.
* All the moving parts of the nikon en-el1 charger camera should be handled carefully.
* When removing the memory card or disconnecting it from the power source or a cable or taking the battery out, first switch the camera off.
* The camera should be protected from knocks, vibrations, magnetic fields, chemicals and sand.
* Avoid storing in a dusty place.
* Do not expose it to direct sunlight or keep in a car for long.
* Do not scratch the camera with sharp objects.

Jul 07

Summary of experience with digital cameras

By adminComments Off

Control exposure

Whether traditional or digital camera, camera, shooting pictures affect the control effect of exposure are critical. To control the exposure, we must first remember that the shutter speed, aperture and ISO sensitivity between the three, that the shutter speed to double the amount of light through the lens will be reduced by half; aperture for each additional file, and shutter speed doubled when the same amount of light will be reduced by half; battery for pavilion zv5000 ISO sensitivity to double the amount of light through even half the amount of exposure can also use the same exposure.

Today, most digital cameras are equipped with the “exposure compensation” function, set the exposure compensation set to +1 files, it means that the shutter speed slows down by half, or doubling the aperture. In fact, using a digital camera to provide the default mode, the camera aperture and shutter speed from the two aspects of regulation, so that the amount of light through double.

Under normal circumstances, can the entire picture from the OLYMPUS blm-1 battery camera to measure light intensity, and determine the best exposure. However, the smart camera is limited, such as shooting in white snow and other objects, the camera itself will mistakenly believe that an adequate amount of light, and automatically reduce the exposure, so captured images on the dark. The large black object shooting, the camera will also think that enough light.

To control the exposure, you need to have knowledge of exposure compensation, so as to capture the brightness and brightness as desired inspiron 1545 battery photos. Under what circumstances, what the most appropriate level of compensation, and ultimately it is up to your own eyes to master. There can not give you a precise standard, but the principle is that, for many white and bright areas of objects should increase the exposure compensation, black and dark, wide area of ??the object, should reduce the exposure compensation.

Infrared film effect

In addition to the general flash, the other light used in photography can be technically, for example, infrared and ultraviolet. Infrared photography, whether amateur or professional in the field, there are a lot of discussion and application. Want to experience, you can apply when shooting high-power infrared light body, you can also upload other electronic devices emitting an infrared filter, so that the infrared will directly hit the main body and then reflected back to the KODAK CR-V3 Battery camera image, so that you can achieve infrared shooting. However, traditional film photography to rely on special infrared, and film preservation, washing and shipping are a hassle, so users are more general lack of experience in this area. However, because silicon material digital camera sensor sensitive to infrared wavelengths, infrared photos than traditional film camera simple.

In addition, if your digital camera with infrared auxiliary functions, such as the SONY F717, then the application of infrared photography, not only can continue to operate under low-light environment ecology photo shoot, and will apply it on a landscape photography can be created with public different special effects, and also can pivot function, but the infrared capabilities perspective is not 100%.

Rational use of flash

Flash is a very convenient and suitable as a supplementary source of a tool. But in general, HP PAVILION ZV6000 battery emphasizing automation of digital cameras and flash is not too strong, at best, be programmed to flash function, to provide “automatic”, “mandatory”, “red-eye reduction,” “slow” and other settings.

“Automatic” mode, the camera automatically determine the shooting scene lighting is adequate. If less, it will automatically open the flash when shooting flash to compensate for the light; “red-eye reduction” mode to let the flash flashes rapidly once or several times, makes the pupil to adapt to, and then to the main flash and shooting, to avoid photo the problem of human eye redness; “force” mode that is either in bright or low light environment, both the flash to flash, usually taken back to the light source used in person; “slow” mode digital camera shutter delay release rate, the prospect of flash lighting, with a slow shutter speed such as 1 / 5 seconds for the low light background exposure can be taken out of the foreground and background are harmonious exposures.

As digital cameras have limited intelligence, in different settings, MOTOROLA GP340 battery flash the effect is difficult to determine, therefore, to better capture the effect, you need to buy an external flash with manual functions of a digital camera, flash through the brain decide strength, size, number and frequency, can greatly increase the scope of photography. General, manual control flash needs a lot of practice, since the use of a digital camera, so you can more than a few test shots to determine the flash of energy. Note that some external flash to reduce the use of low-power light output, color temperature will be slightly higher.

Understand the difference between the computer screen

Using a digital camera users will mostly use the computer for photo processing, or stored on a computer, browse photos. At the same time, due to view photos on the computer screen the effect of the photo and the actual output is not the same effect also caused trouble plagued the majority of users.

In fact, due to the different Acer travelmate 240 battery equipment to produce such a difference is very normal, you feel the image presented on a computer printer output than the photo beautiful? Display resolution is only 72dpi, but showing the image than the results of 720dpi or 1440dpi printer, even better, the reason is that the color on a computer screen output in analog form, when the continuous-tone image can display, even if the resolution not very high, the image is still vivid. But with the ink-jet or laser printer output, the image is composed of ink dots. Printer can only control whether the dots, they can not control the depth of change. And the resolution of the printing and electronic images using a resolution different from the current technology to make the same precise ink drop printer to print is very difficult.

In addition, there are many similar problems, for example, digital camera photo effects in normal, but watch the computer screen Shique a little exposure is not normal, this is because the camera’s LCD display and cathode ray-type display of the differences caused and the same problem with the printer is quite normal.

So how to solve these problems? To solve the printer problem, you first need to adjust your computer screen color to display color printer can be consistent with, and learn to calculate the print output quality images require different accuracy (refer to the above described “shooting Resolution choice “). The problem of digital cameras, liquid crystal display is relatively simple, you only need to use Photoshop to open images using “Image” menu “adjustment” in the “Levels” look, if the average gradation, then replacement A1189 battery photo exposed properly, it should adjust the display brightness If the color scale on the right blank area, then the photo is underexposed, you can have a basis to make adjustments.

Exif Photo Information Protection

Most digital cameras support the Exif photography photo store information, such photographic information can help us to easily save shooting data, to enjoy digital photos, either the feeling of shooting memorable, but also allows us to sum up shooting experience, improve Photography level. Digital photo photography by reading the information, more photos of the same subject using different shutter, aperture and other camera settings and processing, we can better grasp the best time to shoot photo camera settings to improve their photography level.

Exif information is very useful, but can easily be destroyed. If you use Windows XP image file viewing feature to browse your digital photos, photo photography information will be destroyed. Photography information will be destroyed, and these photographic information is damaged can not be restored.

In addition, most computer users prefer to use general-purpose image viewing software (such as ACDSee) to view digital photos, but you need to pay special attention to is that if you use ACDSee rotate photos or change the resolution of digital photos, digital photographers Information will also be changed so that the choice and use digital photo management software, you need special care. If your HP Compaq NC6120 battery digital camera manufacturers bundled digital photo processing and browsing software, you should first select them, such as digital camera Canon ZoomBrowser EX, PhotoStitch and other bundled software.

Jun 21

Construction perspective distortion and the commonly used control methods

By adminComments Off

1, construction perspective “distortion”

Architect or painter generally use a little, two or three of the principles of perspective drawing architectural perspective, one point and two-point perspective principles widely used, because those who can not only draw on the screen height to set any level of eye level and the original straight line perpendicular to the ground (such as the construction of walls and columns) in the screen remains vertical. However, using three principles of perspective drawing, the original line perpendicular to the ground but it will up together (ie the disappearance of the third vanishing point), the composition will be too easy to make when building to produce a tilt, feeling of instability, particularly in the NIKON en-el5 battery replacement performance of the group perspective, the so seldom used.

Photography is the performance of three-dimensional space through the camera’s perspective to the relationship, different from the principles of perspective drawing. When a photographer with an ordinary camera viewfinder, only when the camera is level, the construction of the vertical line will remain vertical in the photo, the perspective drawing of the relationship will have a point or two points of the perspective effect. This limits the use of an ordinary camera architecture flexibility, especially on the ground when shooting high-rise buildings, the bottom half of the screen tend to look too much ground, and vgp-bps3 battery building the top of the intake screen and can not be, if the camera up the belief film, although the top of the building was taken into the picture, but the original vertical lines will indeed ground up together to form a three-point perspective in painting effects, photography, it is commonly known as the “perspective distortion.” In an interview with the construction of the subject’s photograph, in addition to the kind of deliberate use of tilt for the line to express the dramatic visual impact or the pursuit of the composition of the works, in most cases, people are still accustomed to the painting of a point or two point perspective effect that building remains vertical in the photo, because it is ordinary people look at buildings, look at the pavilion dv6000 battery world’s most popular perspective.

2, control of construction perspective “distortion” of the common methods

Keeping the camera level to keep the camera level, the picture of the building will not produce perspective distortion. But with the more urban high-rise building higher, building more and more narrow relative pitch, construction of the external environment was not ideal, just use the normal camera shooting the ground to maintain the level of high-rise buildings, there will be considerable technical difficult. This could be replaced by a broader perspective of the lens. In the first image of the screen, in front of the building ground is certainly too big, but put the process in India can cut off the excess part of the ground, so that the position in the frame construction to be re-scheduled. This cut the cost of the screen is the effective area of ​​the loss of the latitude d600 battery film.

Increase height of shot point when shooting high-rise buildings, click on the shooting in a nearby multi-storey high-rise building construction of the roof or the roof of the podium building to avoid being taken to generate the perspective distortion in the picture. Point can not choose but shooting too high to avoid shooting in the head when shooting less than the bottom of the building, or down overhead leaving the building was originally a straight line perpendicular to the ground slopes downward convergence, resulting in reverse perspective distortion.

Adjust the camera perspective used to adjust the lens or perspective in terms of relatively ordinary camera, adjust the camera’s perspective, the main feature is its lens and film back through the installation of soft body connection (eg, bellows) to offset or reverse to change the image perspective effect and the range of sharpness. With this perspective, adjustment,  battery for Sony VGP-BPS9 composition in the viewfinder when the photographer can adjust the camera lens axis and the film plane relative position between the centers, which can be photographed in the lens focal length under the premise of building a complete top of the building (ground shot) or bottom (shoot height) need to move the screen by mapping the appropriate location, and construction of the vertical line in the picture to remain vertical, thus avoiding the use of an ordinary camera to look up or tilt overlooking the vertical line formed by the perspective distortion.

Perspective works to adjust the lens to adjust the Universal laptop car adapter camera with a similar perspective, but this perspective is the lens to adjust the internal, ie lens optical system perspective before adjustment of the main axis coaxial with the center of the screen (this time as a normal lens), When the photographer to adjust according to the composition when required to move into a different axis (ie, perspective adjustment), the perspective that can adjust the camera lens mounted on the ordinary into a simple but very effective “to adjust the camera perspective.” If the adjustment of the camera perspective is characterized by a different group in the selection of appropriate lens focal length lens mounted on a pivot to adjust the machine body, to achieve coolpix s6000 battery clarity of image perspective and a comprehensive range of control, then use the perspective feature to adjust the lens it can be installed in an ordinary camera body, to achieve unity with the other ordinary shares of the lens body.

Jun 14

Fast Focus sports photography techniques

By adminComments Off

In sports photography, the focus is a difficult skill to master, it is because sports are the subject of photography is highly dynamic, very fast, it is unlikely to allow you to slowly digest, excellence in focus. Professional sports photographers are to track the focus: the changing focus, feel free to let competitors in the frame to maintain a clear image. However, this Acer aspire 5920 battery technique is difficult trained novice photographer consummate.

Easier way is by means of the camera’s AF system. Although the AF system can quickly focus on the good, but if you use the wrong method, you can not play its desired effects. That is, only the subject is just right to stay in the center of the viewfinder frame distance in order to achieve accurate focusing purposes. If the camera is equipped with a lens focal length is not long, the larger perspective, the movement of the subject is placed in the center ranging viewfinder frame, fairly easy; if the camera lens is equipped with 200 mm long focal length lens, the perspective of small, it is necessary to track the subject, but also aligned distance box, you may feel very difficult. To accommodate this situation, may wish to change this habit, can not to consider the scope viewfinder, how to track using only the subject ranging frame, so in the sense that may be easier. If athletes want to be taken outside of filming in one central location, but also the use of automatic ranging system, should use the focus automatic locking device, so that the focus in place. If the subject was fierce mobile-like, time does not allow use of locking devices, which require the composition nor subject other than put in one CANON bp-511 battery central location is not, then we must lift the auto focus, manual focus instead .

Sports photo shoot there is a common focusing method, that is the trap focus, that is, when the subject is scheduled to focus immediately pressed into the camera shutter. Some of the advanced camera for with such performance. Traps are suitable for sports photography focus, such as the use of this method to capture the action bar high jumpers to fly very well. When shooting, you can adjust the focus of the first athletes may at some point over the bar, and then lock the focus, it no longer move back and forth, and finally, as the case of athletes over the bar when pressing the shutter, you can take to the definition is high photo.

It is worth saying is, if the subject is a very high speed movement, such as car racing, we are focusing in the use of a trap technique, you must also press the shutter advance. That should be in place before the body arrived at this moment press the shutter. In advance by the shutter, you can press the HP compaq business notebook nc6120 battery shutter to compensate for the shutter lag period between the actual opening. Of course, some of the advanced auto-focus camera’s focusing capability has catch up the speed of the car, even if the maximum speed the car is horizontal from the screen quickly passed, you can shoot it down. If you exercise before the filming is not clear what point the object will pass through only know through a region, you can use the regional focus mode when shooting with high-speed film as much as possible, according to lighting conditions and film speed to make use of small aperture.

Focus, depth of field according to the table on the lens, so that this region is within the depth of field, the exact focus of the party in the region close to the camera 1 / 3, because the Canon lp-e6 battery future is less than after the deep depth of field. This operation, you can get good results. If the player appears in the far distance, you can shoot in ultra-focus approach. Depth of field from the table on the lens when shooting can be found with the corresponding depth of field with the aperture range, and then turn the focus ring, so that the focus ring after the depth of field marks align the infinity symbol, which will enable you to use the aperture in the under the maximum depth of field. If taken regularly athletes will appear in several different areas near and far, can be used to make a tape loop, put the ring in the distance, the best white paper with a few special areas set the mark, just before the picture in accordance with the marked focus, you can very quickly determine the focus position, do not have to focus through the viewfinder.

Focus of the purpose is to obtain high quality images, the focus clearly is the tomb of the requirements. But for beginners, it requires a clear focus of each photo can have some difficulty, because of many factors point clearly, if not a very good grasp, it is difficult to obtain clear images. Here are a few good way to keep a clear focus for beginners reference:

1. Prevent vibration

Vibration would shake the HP Pavilion dv8000 battery image in the blurred photos, even a very accurate image of the original focus will therefore affect the imaging and clarity. Vibrations generated are generally two reasons:

Camera shake, that is, press the shutter, the camera shake caused instability in the control.

Body movement, that is, the moment the camera shutter open, your subject in motion their own, while the shutter speed is not high enough, did not freeze live dynamic, resulting in image blur.

To avoid camera shake, you can take measures three aspects: ① the camera mounted on a tripod, steady the camera. If by the shooting conditions, can not support the tripod, monopod can also be switched. ② high shutter speed (generally use 1 / 250 second shutter speed), can produce images of reduced camera shake shake. ③ The correct method of holding machine. In the case without a tripod, holding the correct posture machine or not, will directly affect the stability of the camera. Your subject themselves to overcome motion blur, only one way, that is to increase the shutter speed, as long as conditions permit, the CANON nb-1lh battery shutter speed faster, the better.

2. Not one-sided pursuit of a small aperture

Beginners that small aperture will increase the depth of field, must make the image clear, therefore, regardless of where they tend to charge very small aperture, especially when the focus is not sure, but I believe the small aperture can be of help. But the final results do not always ideal, because the use of small aperture will lead to lower shutter speed, and thus lead to camera shake. Therefore, one-sided pursuit of a small aperture is not the best, the correct way should be actively using high shutter speeds and a tripod.
 
Japanese Photography in Focus small Kubo good guitar has its own unique way. Each shot, he should be back three cameras, the focus of the camera as follows: the distance of 10 meters of their location, with 100 mm zoom lens, focal length 100; distance of 20 meters, with 200 mm zoom lens, the focal length of 200; distance of 30 meters, with 300 mm zoom lens, the focal length of 300. In his view, such a distraction when shooting do not have to adjust the focal length, the results can determine whether the NIKON camera battery visual frame by which the camera.

May 25

Photography tips – Exterior light and tonal control

By adminComments Off

Location of the shooting that the most important is how the control of shooting and lighting, picture framing style and aesthetic decisions. Light tone and color control decisions.

1, cloudy light

This scattering of light is very soft, is the ideal portrait lighting photography. The characters in this light skin and delicate, clean, texture, and light eyes in this figure will be very comfortable. But the contrast between light small scene, but the sky is the lack of color is too monotonous, but you can use the camera’s white balance or color mode mirror to change the color of the sky. For example: use color mode can be used when shooting orange brown gradient lenses or mirrors, etc. to create a gradient effect or a camera with cold evening and the warm tone to change the sky color transfer mode; when shooting in black and white can be used to press the dark gray sky gradient mirror ; You can also choose a lighter background plus soft NIKON d5000 battery replacement lens effects to create a light color of the dream.

* Cloudy common effects of shooting

If you shoot without a general background of the sky brightness of the faces can be carried out directly on the figures to determine the camera’s exposure metering, when people face to use fill light reflector. As the characters face and the background contrast is smaller, flash mimic sunny backlit backlighting or side effects of exposure to the contours of characters, the flash of light when used as the exposure index profile is greater than the numerical aperture used in the camera 0.5-1 or so.

* Mainly cloudy sky background by shooting

Some can be added at this time the sky orange gradient mirror, mirror in the yellow, brown, white balance, lens or using a different mode of change in the sky monotonous effect. Metering with the camera lens on the sky the color needed to determine the camera’s exposure metering portfolio. At this point people face to use Dell Latitude D505 charger flash for fill light, fill light should be equal to or slightly greater than the index used by the camera aperture.

There is also the flash can be used as backlit film backlit or side effects or bright line silhouette effect.

2, sunny day along the light before the light side light

The light figure by the light area, face cleaner, less shadow. But the scene was not obvious between the shades of color, contrast a small, three-dimensional feel bad, and direct light or facial, eye discomfort, then arrangements can shape characters and more romantic feel to the main eyes closed. The effect of the light blue sky and green water effects shot is ideal.

* The shooting sky effect

Metering in accordance with the main color of the sky brightness of the blue to determine the camera’s exposure metering portfolio. People face to use flash fill light, fill light in the direction of attention with the sun in the same direction, and the fill light of the index and the Presario CQ60 battery camera aperture used in the same or slightly less than the camera aperture. People can also use the other side reflectors for fill light.

If you would like to emphasize the effect of blue sky can be gray gradient in front of the camera plus lens, polarizer; exposure can also reduce the pressure of the dark sky to deepen the blue sky effects; You can also use the tungsten white balance mode, the flash before the Jia Leideng 85 lens on the people to restore the people’s faces light fill color.

Note: When adding to pressure the dark sky, a polarizer, the cheap camera batteries camera’s exposure compensation to add an exposure, when the camera flash fill light index than the aperture used to increase an amount of fill light.

* The shooting green water effects

Select the green light along the surface as the background. Metering can be directly on people’s faces to determine the brightness of the camera’s exposure metering can be combined. According to the situation the characters face, fill light using reflectors. At this point you can tune the performance of the screen with cold, giving a sense of Jingya.

3, sunny side light, side of the backlight, the backlight light

The tecra a3x battery pack bright light can produce contour features, and can fully demonstrate the leaves and translucent objects, and Shalei clothing texture. At the same time the larger contrast between the scene, with a strong three-dimensional and layered, but also make people face, there were many shadows. But this light is the most commonly used light photography is shooting at dusk effects, silhouette, dreamy effect, amidst effect, good effect during the day and taking night light.

* Side light, side backlighting, backlit shooting common effect

Select the side light, side backlighting, backlit illumination light through a sense of background, this background has a rich shades. People’s faces light metering by the camera exposure meter to determine combinations of characters in the face at this time can be used to fill light reflector. If you reduce the pressure of dark background exposure shot, this time to use flash fill light, fill light flash index used to mean that the camera aperture.

* The shooting at dusk effect

Choose to backlit or side of the backlight of the sky or water as the main background. Metering coupled with lens color desired color of the background brightness of the primary to determine the camera’s exposure metering portfolio. NIKON coolpix s3000 battery Camera can be added before the general gradient mirror orange, brown gradient mirror, mirror, etc. in the yellow color of the sky to exaggeration. At this point people face to use flash fill light, fill light can be equal to or slightly greater than the index used by the camera aperture.

* Silhouette shooting

To select the backlight or the backlight bright side of the background effect can also choose to have a backlit background, such as the windows light the sky as the background or the background or the light-colored surface such as the background. Camera exposure can be the brightness of the background-level exposure over 1-2. People should outline the main shape, face and body contour must be clear, and to set off in bright blocks of color, then people can not face the fill light to form the whole silhouette. At the same time before the camera lens can also use brown, orange gradient lens or mirror, and white balance mode using the camera to create effects.

Fantastic results of shooting

Choose the side of the backlight or backlight transmission strong background, that is, select the background of strong chiaroscuro. Metering by metering the brightness of people can face. Front of the camera lens, or to add soft soft hollow mirror, this time people face to use the fill light reflector. Note: When using a longer focal length or larger aperture shooting, dreamy effect more pronounced.

Shooting backlit water effects

To select the backlight or the backlight side of the water as the background irradiation.

A, when the surface brightness in dark colors to determine the camera’s metering exposure of a reference portfolio, you can use warm color film or the Dell latitude E6500 ac adapter camera’s white balance mode the effect of water shooting sunset. People face to use flash fill light, fill light should be equal to the index used by the camera aperture. Spot at this time if the water, the emergence of stars before the camera lens can be added to highlight the sparkling effect.
B, if taken advantage of the water silhouette backlight, then according to the brightness of the background to open a large 1-2 meter-level exposure to shoot.
C, if the use of water shot high-profile effect, according to people face exposed, but also stressed the use of hollow flexible mirror dream elegant effect.

4, sunny day in the shade or light shade

This light has the characteristics of Yin Tianguang line, but the light intensity under the shade of the brightness and contrast of light outside the shade of a larger, if the exposure control, it might lose some of the background overexposed, or dark colors lose brightness declined significantly Some level. Therefore, in the shadow of the exposure control is a crucial link.

* The shooting under the shadow people

First measured the background color of sunlight, the brightness value of the primary, and then measure the shadow of the main color of the background brightness value, then press twice to determine the average brightness weighted combination of the camera’s exposure, in addition to 18% of the ash can be used metering plate under the sun, and the resulting value is the average exposure exposure value. At this point people face to use reflectors or fill flash light, flash fill light should be equal to the index used by the HP iPAQ hx2490 Battery camera aperture.

Apr 28

How to take those beautiful pictures of smoke

By adminComments Off

Seen all kinds of smoke. For some people, smoke offensive; while for others, the smoke gives inspiration. If you belong to the latter, welcome to smoke photography world.

This article will tell you how to smoke everywhere daily made into beautiful photos. Prior to this, take a look at the photos below. After reading this, you can make these work.

Now we need to take a look at what things:

Camera: Obviously, the most important thing. However, you must use a Dell latitude d530 charger manual aperture and shutter to the camera, can change the ISO better.
Burning incense: you need to use incense in the room. We use it to produce smoke (Note, not the use of cigarettes.) There may also need to be caught in something burning incense.
Background: The background is very important. Must use to do things black background. Black cloth or paper can be.
Tripod: Tripod to ensure a smooth shoot.

Set up equipment

This step is very important and will determine your quality of Dell Inspiron 9300 ac adapter photos taken. Follow these steps to do seriously.

1. Setting up the black background, put the incense around the fixed far in the background, the location of the former 1m.
2. The flash on the incense on the right (or left) 0.3-0.5m distance.
3. If you have to use reflectors, put it in the opposite position, facing the incense.
4. Camera mounted on a tripod, placed incense around the former location of 1m.

Camera Settings

Put away after installation, you can start shooting. Now need to do some settings on the en-el8 battery camera, otherwise it is nothing less than the film. Here is the method to set the camera:

1. High-speed shutter: To use a faster shutter response because the smoke faster than you. To capture the smoke, you need faster shutter response.
2. Small Aperture: Press the shutter when you do not know if you need to smoke area of ​​focus in your vicinity, with a small aperture to increase depth of field, focus is required to use manual focus mode. When adjusted, after all, the best take a minute to observe the smoke, observe its momentum. Finally, the HP 6710b battery smoke around the object instead of focusing on your desired location.
3. Low sensitivity: low sensitivity means that the picture quality is better.
4. Source: high-speed shutter, small aperture and low sensitivity of the portfolio, the exposure is often insufficient, so the need for more light.

Now you can give full play to their creativity, take more photos of smoke. Camera settings, lighting, and smoke can casually. You need to get good photos before a large number of exercises, the success rate may be 1%. But do not be discouraged, eventually you will get the photos dream.

Knowledge about smoke

1. Can be used as the HP pavilion dv4 adapter manufacture of incense smoke materials, and smoke than Hong cheaper and can burn longer.
2. Ventilation is very important. There is no doubt, if ventilation is poor, you will be smoked with tears even if you take high-tech gas masks and full of pictures of the smoke will not make you satisfied.
3. Control the wisp of smoke in the state is very important, so ventilation is not good, every once ventilation is a better approach.
4. In a perfect air environment, the smoke will drift vertically up, floating on a cloud of smoke to form smoke, do not let this stuff appears on the screen.
5. By changing the direction of the smoke to change the pattern of smog, and many tools can do this, such as a spoon, the object can form different structures in different sections of smoke shapes.
6. Smoke also determines the rate of increase in the studio 1735 battery shape of the smoke, it is the source of the temperature and smoke.

Apr 22

10 Portrait Photography Tips

By adminComments Off

1. Using a longer focal length lens

Many photographers claim, 50mm is a “must have” portrait lens, but the standard lens shoot out of the picture, and the human eye to see the always very similar. To get more interesting photos, we should avoid the use of standard lens, because the screen is too general.

Many of my HP pavilion dv7 battery pack portraits are shot using the 200mm or 85mm, this picture of the “compression” is a 50mm lens can not. This compression will not only reduce the deformation of the subject, and a telephoto lens can create a very impressive background blur effects, but also “closer” the distance between the model and background. Taken using 200mm lens, which may be some difficulty in communication with the model, but the results are worth it.

2. To avoid the eye-level camera angles

Many times we are accustomed to from the “right” point of view to shoot, after all, this is the most simple. Challenge yourself, find a different angle – above or below the eyes, to bring a fresh perspective to the screen. This technique also can be used to highlight the different shape and height. Below, I let the bride sit on the floor, focusing on her face and hair ornaments, other Dell XPS M1530 charger parts of the body blur. This portrait than an ordinary upright much better results.

3. Use off camera flash

Shooting the wedding, we never flash on the camera. Prominent figures direct flash can not face, but also make the loss of three-dimensional pictures. Lighting from the side to the characters, you can create a shadow of the transition, prominent figures of features, and make photos with high contrast of light and shadow. Another advantage is that you can weaken the background details, great scenery shooting portraits.

4. The sun with flash suppression

In the midday shooting under natural light, is not a simple task. But with the artificial light, such as a pair of hot shoe flash, can suppress the sunlight, get better exposure. Interest in the shooting environment of the surrounding landscape portrait of this technique particularly useful.

HP pavilion zv6000 battery pack Flash can be suppressed by our sun, the sky due to exposure, only to illuminate the subject. So we need to use 2-4 sticks of hot shoe flash (no diffusers) to get enough light, but also put the flash close to the model.

5. Backlighting

Training can find a good pair of eyes, light takes time and practice. Once you learn how to under any circumstances “found the light”, you can always shoot brilliant portrait pictures. After all, the basis for photography alone.

Whether the sun, windows, or ordinary light bulb, when these light source is located behind the subject can be produced when the contours of the beautiful light. Profile photo light effect can be enhanced three-dimensional, the characters and backgrounds separate.

6. Silhouette and reflection

Learn to use Dell latitude d520 adapter reflective surfaces and silhouettes can make your photos on both the visual and content greatly exceeded. The silhouette, the key is a strong backlight source. For reflection, try to use some reflective surface, sometimes the best are those that you unexpected props, such as flooring, glass, puddles, and marble walls.

7. Utilization prospects

To make good use of the immediate use of all available things. In fact, many times we will take the initiative to find future elements. Association found between the branches of the “hole”, abstract objects, and even everyday items such as photographs can enhance the “feel.” You can also use the telephoto lens blur the foreground and create a more dreamy effect.

8. To the sun as the light source

For photographers, looking to avoid the sun and Dell inspiron 1720 battery replacement shadows to get the average exposure is a very common thing. Even the backlight is considered in direct sunlight than the shot easier. But the sun can also be used as a point source to use. The area of ​​sun exposure, the background and around the dark shadow of produce dramatic results will naturally focus on the characters body. Use in different lighting conditions this technique can create different visual effects.

9. Use effect Night Portrait shooting

Environment in the dark and no light is available, the effect of light is a good choice. This lamp is that it continuously light, you can see the screen in real time the final results. We use LED effect light, it can provide more than 2 hours of electricity. They are a good substitute for flash, easy to use and adjust.

10. Using color film

To flash with CTO (orange) or CTB (blue), and other color HP pavilion dv2700 ac adapter film can change the mood of the screen. Sometimes if the environment is the blue color cast, use the CTB will be able to adjust to a warmer scene. CTO can be used to simulate the effect of the evening sun.

Apr 02

CANON EOS-1V using experience

By adminComments Off

As the spring sun cut through the boredom of rainy days is like the streets of Taipei finally shocked by the news of Fen, the latest flagship models Canon EOS-1V has been flown to Taiwan, after learning of the news, photography, web editor Department of troops quickly pack and go, and give you first-hand reports!

At first glance the EOS-1V, I felt it and the previous EOS-1N biggest difference is in addition to the original smooth appearance, more due to the strengthening of the internal circuit and institutions, adds a little height and the overall more convex and full. Hold the whole family has always been a sense of the adhesive to maintain a sense of HP 530 ac adapter EOS, Take Shuaibu Diao in the hands of the unity, the weight is even more heavy.

First put on and EOS-1N generic white microscopy powerful motor E1 and EF70-200 F2.8, gently press the shutter, experience the pleasure brought by the new focus system, and compared to the previous generation flagship models in the Focus the same speed as the quiet and fast, arbitrary point to the distant target, tap the shutter, while also adjusting the focus, the technology brought to us to enjoy, not only in the sense of touch, sight are hearing .

Speaking of hearing, EOS-1 V shutter sound significantly more than the EOS-1N calm and lively. The so-called bright, that is clear and brief, and no clear-cut feeling. Canon seems to mirror the braking areas, should be good progress.

To learn more about the performance of Canon EOS-1V actual performance? It does not matter, we are arrangements, will be launched as soon as possible for everyone!

PS: Thank Jiu Hua equipment to provide equipment, this report can be published for the first time!
The following article is online photography magazine in March this year reported the contents of the essence

Flagship models Canon introduced EOS 1V
The new generation of the legendary Canon professional camera has finally come out, code-named the Canon EOS 1V Professional machines from the past the legendary EOS 1S, mass production and changed its name to EOS1V. That is, to ask the way from the EOS3 as the stone, after a multi-market evaluation and practical test, the modified function and the development of many of the top ship out of the Canon models.

Canon chose the occasion of the millennium of the spring launch of EOS 1V which sets its flagship models, the same oath of its chief and martial arts to the professional camera ambition to challenge the Satellite a105 throne, EOS1V this time seems to have prepared, it is actually practicing what masterpiece magic to challenge? See our coverage of this issue.

First, let’s explore what “EOS 1V” the meaning of the name in the end that? Canon in this regard a few words to let everyone to think about, first, “V” on behalf of the Roman numeral “five”, that is the fifth Canon EOS 1V is the professional-grade SLR (Editor’s note: the previous four for the F-1, NewF-1, EOS1, EOS 1N); again “V” also represents the “Vertex” (top), “Vanguard” (leader) and the “Visionary” (idealism). Regardless of whether the EOS 1V really meet these requirements, but one can imagine that the Canon in the manufacture of this camera when the expectations are based on these standards as goals. EOS 1V this camera is positioned in the professional autofocus SLR camera, EOS 1V EOS series of cameras not only included in the commendable features and make improvements, but also adds some new concepts and ideas, so this camera EOS 1 or EOS1N of users, it should be in operation will be more cordial.

Enhance the design robustness and protection
Canon EOS 1 D90 battery V in the development of a second-generation professional SLR camera in the process, is able to play through the midst of the shooting environment and design, in order to take into account the functionality and robustness considerations, the body part is the aluminum mold and rigidity compared with the glass fiber-reinforced metal polycarbonate, while the shell part is the use of magnesium alloy, a lightweight, strong advantages. The magnesium alloy is the difficulty of the machine is more difficult to mold, especially in some curve on the surface of the camera, but in the end Canon is the application of advanced “thixo-molding” technique was able to solve.

On the other hand, the professional camera must be able to play by the rapid changes in temperature, to be able to water, sand, dust, in other words, professional cameras have to be smooth in any case Jieneng use. To overcome this, Canon in this regard in consultation with a number of photographers working under severe conditions of the opinion, carefully re-assess the improvements, in enhancing the level of water and dust have made great progress. Camera 72 and the activities of the main part of the gap, such as the shutter button and control dial, etc., are carefully to be silicone seal, the edge of the camera back cover, but also with the film processing; In addition, the battery Room set of new GR-E2 in the hands are well protected, and the function button in the internal aspect, but also made waterproof and dustproof protection.

The shutter system, since the first and APPLE A1281 battery second shutter curtain is an inexpensive non-contact controlled by the rotating magnets, this design will not produce more dust accumulation and adhesion problems. The shutter blades are made of carbon fiber material, and Abdullah Al (a light and strong aluminum alloy), this material in the interior of the test results can withstand more than one hundred and fifty thousand times the number of shutter operations (about 4000 Volume 36 film). In addition, because the second shutter curtain in the use of cheaper B shutter is open, do not use electricity, so to save battery consumption. According to the original data show that the use of a 2CR5 battery at room temperature in normal operation, power can be used up to 1000 hours.

The world’s fastest continuous shooting speed
EOS 1V advertised is the “world’s fastest continuous shooting speed” — 1 second 10, EOS 1V main reasons why so fast because of the introduction of the powerful film advance motor PB-E2 (for NP-E2 Ni-MH battery) caused, even in the use of predictive AF mode, it can reach the speed of a second nine.

45-point Area AF
The area AF EOS 1V EOS 3 SONY np-qm91d battery though 45 points is the detector-based, but due to the strengthening of respect in the optical auto-focus adds to the performance. In single auto focus mode, the AF speed and predictive AF performance is better than the EOS 3. EOS 1V of the 45 pairs of densely arranged focus is the area in 8x15mm, the user can shoot according to their own situation to automatically or manually select the focus area is selected when multiple focus points, auto-focus system capacity will be significantly extended. In addition, EOS 1V also provides the current operation of the world’s fastest AF, AI Servo mode in the next second nine shots, but also a continuous shooting speed of 50 km per hour, the subject (eight meters in front of the camera to EF300mm f/2.8L IS USM shooting conditions.) To understand the EOS 1V and configuration of the combination of the maximum motor continuous shooting rate, please refer to the table bottom of this page.

45 focus point region to use the simplest method is to use all 45 points, so the focus is also suitable for the results obtained, and such pictures of the shoot, even if a general snapshot of the precise focus can be sold for the balance photos, but this use of the regional focus is just 45 points chopper small scale, the real power should be used in some special show before the situation was out shooting.

Unique cga-du14 battery design extends the detection autofocus lens combination
EOS 1V’s AF area using two detection systems are components, and these two components complement each other to complete under the common effective focus. This 45-point AF area, focus point for each level of detection by the sensor are formed, these sensors operate with EF lenses, the maximum aperture of up to f 5.6 or more, suitable for the main focus for the dynamic. The area in the middle of the seven AF detection point is a combination of vertical cross detectors, which operate six to EF lenses, the maximum aperture up to f2.8 or more, and confirmed that the focus in theory than the horizontal accuracy of the detector is three times higher. In addition, the same with the EOS 3 is in the use of double lens auto focus (EF 1.4x and EF 2x), the focus area of ​​the cross the central part of the sensor can still detect the role, and provide the maximum aperture at f8 or more.

Innovative autofocus assist button
EOS1V part of innovation is the “auto-focus assist button” design. Where the change in shooting position, or a fleeting photo opportunities, even the most experienced photographer, it is difficult to immediately select the correct button on the focus, so the EOS 1V allows users to record their own on the focus of setting, this way, the photographer can simply pavilion dv7-1130us press the button to quickly switch to previously set a good point.

Shorten the round trip time mirror
The EOS1V Another innovation is the mirror significantly reduced the round trip time. As the speed of the mirror and from the ultra-high speed continuous shooting is a major obstacle, in order to control this situation, Canon uses a “active mirror control method,” so that more effort from the mirror. This method is mechanically controlled mirrors from, you can reduce mirror vibration, limit it in a very short period of time, immediately before the vibration of its suppressed, while among black mirror will also shorten the time shortened to 80ms (shutter speed 1 / 60 sec or faster).

Exposure Control
Similarly with the EOS 3, EOS 1V to provide the twenty-first District TTL evaluative metering, the metering modes include: Evaluative metering (can be linked with any AF point), part of the metering (approximately 8.5 viewfinder Central % area), the central spot metering (approximately 2.4% of viewfinder central area), spot metering linked to the focus (about 2.4% of viewfinder area), multi-spot metering (up to eight) and the Central weighted average metering and so on.

Viewfinder Information
EOS1V viewfinder field of vision was 100% (with EOS1N the same), which is not included in EOS1V features one of the reasons the eye controlled focusing, as the eye can reduce vision control rate of focus. In addition, EOS 1V of the focus in the viewfinder than the EOS 3 shows bright, so bright light conditions than the more easy to discern. The information in the viewfinder, the screen auto-focus area for the oval of focus, the central spot metering area; bottom of the screen for the manual exposure setting, AE lock, flash ready signal, FE lock warning, high-speed flash sync, shutter speed, FE lock, B shutter, focus point selection mode, depth of field auto exposure, aperture, exposure compensation / flash exposure compensation, focus instruction and other projects to complete; the exposure level was several feet right of the screen labeled ( ± 3 level), exposure series instructions, flash exposure series, film counter, film countdown counter, depth of field preview and other projects.

Film devices
EOS 1V film advance system is the automatic deduction sprocket with fewer systems. EOS1V NIKON camera batteries one second continuous shooting speed of up to ten, with the EOS 1NRS neck and neck, but the difference is with the RS, EOS 1V has a hinged mirrors, and down in the operation of each exposure; and RS is the use of fixed-style semi-transparent thin mirror, EOS1V advantage of this design can reduce the viewfinder dark time (140ms down to EOS1V by the RS, the 80ms).

EOS 1V film devices within the system using an infrared detection sensor to control the film advance, the system used in some EOS series models will make the film image area some hazy conditions will occur, but this camera used on the new optical detection system can prevent the case dim image regions, which means that any infrared film can be applied to EOS 1V.

Another important point is that it inherits the EOS series lens mount, which is the EOS used the camera in your hand, it all can use!

< Older
Blue Taste Theme created by Jabox